Author: Angela Wang

Time needed: 1 hour

Here’s how to get the potential Soneium token airdrop

1. Sign in to Soneium Layer 3 quest page

   Go to https://app.layer3.xyz/quests/the-soneium-minato-testnet and sign in with your wallet. Sign the transaction.

2. Get Sepolia ETH

   As Soneium is on testnet stage, you will need to get some testnet ETH. You can get testnet Sepolia ETH from Infura, Alchemy, or QuickNode

3. Bridge to Soneium Testnet

   Bridge from Ethereum Sepolia to Soneium Testnet by connecting your wallet to https://bridge.soneium.org/en/testnet?utm_source=Layer3. Make sure you are on the Sepolia testnet network. Select the amount of testnet ETH you want to bridge and click “Review deposit”. Then review the transaction and click “Initiate deposit”. Confirm the transaction on your wallet as well. Note that the transaction may take several minutes to process. Return to the Layer 3 quest page and click “Verify” to verify the task has been completed

4. Join Soneium Discord

   Click “Open Discord” and follow the steps to join the Soneium Discord. Once joined, make sure you click “Verify”.

5. Claim rewards

   Click “Switch to OP mainnet” and confirm you will switch to Optimism network on your wallet. Click “Mint CUBE to claim”.

6. Refer friends

   Copy your referral link to refer your friends for rewards.

7. Trending Now: Soneium

   Complete the quest by reading the information. As well as reading their Blog and Sony’s press release. Claim your reward by switching to OP mainnet and clicking “Mint CUBE to claim”.

8. Trending Now: Swap on Soneium Minato

   To complete this quest, bridge to Soneium Testnet and then swap any amount of ETH via Very Long Swap on the Soneium Minato Testnet. Finally, claim your rewards.

Time needed: 20 minutes

Here’s how to get a potential The Backwoods ($LEAF) token airdrop

1. Register for The Backwoods

   To register for The Backwoods, simply go to https://app.backwoods.gg/ and connect your Solana wallet (e.g. Phantom wallet). Connect your Discord and Twitter accounts by clicking “Connect” under your profile.

2. Start playing

   Click “Play” to enter the game. You can earn 2,000 points per game and winning a stage gives you 30 points.

3. Optional: purchase NFT heroes

   You can purchase NFT heroes at https://www.tensor.trade/trade/backwoods. NFT heroes automatically update into the game and cost approximately 2.8-2.9 $SOL. The benefits of holding The Backwoods NFT heroes include being able to have unlimited referral codes, the ability to stake the NFT and extra points for playing with the NFT. Staking 1 NFT rewards you with 4,000 points per day and playing with the NFT allows you to earn 4,000 points per game. It may be a good idea to purchase the in-game NFT because the game is putting a lot of focus on in-game stats right now. This means having good in-game stats may be a key to unlocking more potential rewards and airdrops in the future.

4. Progress with Season Pass

   Get a season pass to receive in-game materials and mock leaves, which you can use to craft items or sell for additional mock leaves.

5. Unlock the Premium Season Pass

   For 0.05 Solana (around US$7), you can unlock the Premium Season Pass. The Premium Season Pass provides extra rewards and advantages in the game, such as in-game materials and the ability to repair equipment if you continue playing it.

6. Create a Backpack Exchange Wallet

   Backwoods is partnering with Backpack Exchange. You can earn 100 crystals by signing up with Backpack Exchange and creating a Backpack Wallet. If you previously used a Phantom Wallet, you can import it into the Backpack Wallet to claim this reward.

Time needed: 5 minutes

Here is a guide on how to get the potential Moongate ($MGT) token airdrop

1. Get Moongate Infra Partnership Explorer: Avax Labs OAT

   Connect your wallet to the Moongate Galxe page and complete the 2 social tasks. Mint the Moongate Infra Partnership Explorer: Avax Labs OAT.

2. Get Moongate Infra Partnership Explorer: Morph OAT

   Complete the social tasks of following their social media sites, verify that the task has been completed on the page and mint the Moongate Infra Partnership Explorer: Morph OAT.

3. Moongate Infra Partnership Explorer: Plume Network

   Complete the social tasks i.e. following their social media sites, verify that the task has been completed and mint the Moongate Infra Partnership Explorer: Plume Network OAT.
   

4. Get Prize Pool entry

   Entry into the Prize Pool gets you a chance to get US$1,000 and 200 PowerUp NFTs. To enter the Prize Pool, retweet their Tweet and visit the Moon Odyssey and Earn the $MGT page.

5. Complete Moongate Quests

   Connect your wallet to https://app.moongate.id/quest. Complete the onboarding tasks which involve connecting your social media accounts.

6. Complete Product Update tasks

   On Moongate’s quest page, complete the Product Updates tasks. These include trying out their AI Bot, signing up for early access, adding MoonPass to your wallet and downloading the app to your mobile device. Remember to click “Complete” once you have finished the task.

7. Complete Community tasks

   On the Moongate quest page and complete the Community tasks. These are social tasks such as following social media channels, interacting with posts and creating content. Remember to click “Complete” once you have finished the task to verify.

8. Complete Partners tasks

   The Partners tasks are listed on the Moongate quest page. Complete the tasks such as following the social media accounts of Moongate’s partners.

9. Check in daily

   Connect to the quest page daily and click “Check In” to complete the task.

10. Refer your friends

    Find your referral link on the quest page and invite your friends to join Moongate. You will earn 10% of points from direct referrals and 3% from their referrals.

Here is a guide on how to get the potential Neurolanche X Labs ($NEROX) token airdrop

1. Join Neurolanche X Labs telegram

   Join the Neurolanche X Labs tap to earn Telegram bot HERE. Note you may want to use both a burner Telegram account and burner blockchain wallet for added security.

2. Open NERO app

   On the Telegram channel, click “Play now and Earn”. If you are on a PC, you will need to scan the QR code using your mobile device to play there. A mini app will then pop up.

3. Engage with the bot

   On the mini app, engage with the bot by following instructions to earn rewards. Instructions include tapping onto the bot.

4. Complete tasks

   Go to the “Tasks” tab and complete the tasks. Tasks include following their social media channels and daily tasks such as logging in and interacting with their posts.

5. Refer friends

   If you want to increase your earnings, make sure to use the referral link provided. The more people you refer, the higher your potential rewards. You can find your invite link under the “Ref” tab.

6. Join dApp Staking V3 Season 2

   Connect your wallet to the Neurolanche Portal, making sure that you are on the Astar network. Click “Stake to earn airdrop”. Click “Vote and stake”, select the amount you wish to stake and confirm the transaction. Note you must stake at least 500 ASTR and your account must hold more than 10 ASTR transferable tokens after staking. You will earn rewards for staking.

Time needed: 1 hour

1. Connect to testnet

   Connect your wallet to the Overlay Protocol ($OV) testnet. Make sure you are on the Arbitrum Sepolia network.

2. Claim testnet tokens

   Click on the top bar to claim Arbitrum Sepolia Testnet ETH and test token OVL. You will get 0.003 testnet ETH and 50 testnet OVL. Note you can only claim testnet tokens on the website once. However, you can claim an extra 100 testnet OVL and 0.0069 testnet ETH at their #get-ovl channel on their Discord by typing “/faucet” and the Arbitrum address that you will be using to interact with the testnet.

3. Get Discord roles

   Once you have claimed the extra testnet tokens on Discord, go to #claim-ovl and you will automatically be awarded the OVL Test Token Holder role on Discord.

4. Trade on Overlay Protocol testnet

   Go to https://app.overlay.market/#/markets and select a market to place a long or short position. Choose “Long” or “Short” and the leverage. Then click “Approve OV” and approve the spending limit on your wallet. Afterwards, click “Build” to open your position.

5. Monitor your position

   Monitor your position constantly. Close your position if the market is trading in the same way as your position.

6. Complete more successful trades for more points.

   We suggest returning daily to open more positions. This is because you will be awarded points for successful trades. Point scores are updated every Thursday at 0:00 UTC.

7. Check your Purrps Points score

   You can check your Purrps Points score on the leaderboard HERE.

Here’s a guide on how to get the potential Overnight Finance ($OVN) token airdrop

1. Connect to Overnight Finance

   Connect your wallet to Overnight Finance HERE.

2. Check stats

   Go to the “Stats” tab. As USD+ is fully collateralized by USDC, so long as their collateral value is over 100% you will be earning rewards in USD+ through a rebase mechanism. Therefore, under the USD+ Portfolio section, check the figures under “Total” and “Total USD+ in circulation”. If the figure under “Total” is higher than the one under “Total USD+ in circulation”, you would be earning rewards through the rebase mechanism for your USD+. Also, check the daily APY figure to see what your rewards would be. Compare these figures under each of the supported chains to see which chain offers the best yields.

3. Mint USD+ token

   To mint USD+, go to the Mint/Redeem tab and make sure the slider is on “Mint”. Select the network on the top right-hand corner. Choose between USDC and USDT tokens and the amount you wish to mint. Approve the transaction.

4. Mint USD+ on Arbitrum

   Note that you would only qualify for the potential Overnight Finance ($OVN) token airdrop if you hold mint and hold USD+ on the Arbitrum network.

5. Earn Points

   You will earn points for holding USD+ on the Arbitrum network, even if you USD+ is deposited into liquidity pools.

6. Deposit USD+ into liquidity pools

   Go to the “Pools” tab and choose a liquidity pool. Click “Deposit” and switch to the chain the pool is on. Select the input tokens and approve the transaction. Please remember to do your own research before choosing a liquidity pool because there’s not just impermanent loss risk, but there’s also smart contract risk.
   
   Learn more about impermanent loss

7. Get extra Points and bonuses

   You can get extra Points and bonuses for finishing in the top 5 leaderboard for converting to USD+ or referring your friends to use Overnight Finance.

Time needed: 3 hours

Here’s a guide on how to get the potential Curvance ($CVE) token airdrop.

1. Connect to Curvance

   Connect your MetaMask wallet to https://app.curvance.com/.

2. Complete Sepolia Tasks

   The first set of tasks are on the Ethereum Sepolia testnet network. Therefore, make sure you are on the correct network. A guide on how to complete the Sepolia Tasks are set out in steps 3 to 10 below.

3. Get testnet tokens

   Click on “Faucet” at the top of the page and “Click all”. Note you will need to get testnet ETH separately from another faucet. Come back every 24 hours to make a new faucet request.

4. Deposit and collateralize assets

   Click on the notification button on the top right-hand corner and click on “Deposit Asset(s)”. Afterwards, click “Deposit” and enter the amount of WBTC you wish to deposit. Approve the transaction and confirm the deposit both on the page and on MetaMask. Note this will also complete the “Collateralize Asset(s)” task.
   
   You can also click on the notification button to track your testnet task progress.

5. Borrow assets

   Click on the notification button on the top right-hand corner and click on “Borrow Asset(s)”. Then click “Borrow” and enter the amount of USDC you wish to borrow. Confirm the transaction.

6. Repay assets

   Note you will need to wait 20 minutes after borrowing assets i.e. task 4 above before you can repay. To repay, click on the notification button on the top right-hand corner and click “Repay”. Scroll to the bottom of the page and click “Repay”, enter the amount you wish to repay and click “Approve”. Confirm the transaction.

7. Lend Assets

   On the dashboard, click “Lend”, enter the amount you wish to lend and follow the steps to approve the transaction.

8. Lock CVE

   Click on the notification button on the top right-hand corner and click on “Lock CVE”. Enter the amount you wish to lock and click “Approve”. Follow the steps to approve the transaction and lock the token.

9. Unlock CVE

   Click “Manage” and “Unlock”. Note however there will be a penalty for unlocking early.

10. Withdraw

    Click on the notification button on the top right-hand corner and click on “Withdraw”. Scroll to the bottom of the page and click “Withdraw”. Select the type of balance to withdraw (i.e. Uncollateralized Balance or Collateralized Balance) and enter the amount you wish to withdraw. Click “Continue” and “Withdraw”.

11. Complete Berachain tasks

    The Berachain tasks are completed on the Berachain bArtio testnet network. A guide on how to complete these tasks are set out in steps 12 to 19 below.

12. Mint testnet tokens

    Click on the notification button on the top right-hand corner and click on “Mint testnet tokens” under the Berachain tasks. If you are not already, you will be changed to the Berachain bArtio network. On the popup window, click on the Berachain faucet button to get testnet Berachain tokens so that you can pay transaction fees on the network. On the new window, enter your wallet address and click “Drip Tokens”. Afterwards, claim the remaining testnet tokens by clicking “Claim all” on the dashboard. Come back every 24 hours to make a new faucet request.

13. Deposit Asset(s)

    On the dashboard, make sure you are on the Deposit tab and click “Deposit”. Select the type of deposit you wish to make and enter the amount you wish to deposit. Approve the transaction.

14. Borrow Asset(s)

    On the dashboard, make sure you are on the Borrow tab and click “Borrow”. Select the amount you wish to borrow and click “Borrow”. Approve the transaction.

15. Repay Asset(s)

    Note you will need to wait around 20 minutes after borrowing assets i.e. task 14 above before you can repay. On the dashboard, make sure you are on the Borrow tab and scroll to the bottom of the page. Click “Repay”, enter the amount you wish to repay and click “Approve”. Confirm the transaction.

16. Lend Asset(s)

    On the dashboard, click “Lend” and enter the amount you wish to lend. Approve and confirm the transaction.

17. Lock CVE

    Click on the notification button on the top right-hand corner and click on “Lock CVE”. Enter the amount you wish to lock and click “Approve”. Follow the steps to approve the transaction and lock the token.

18. Unlock CVE

    Click “Manage” and “Unlock”. Note however there will be a penalty for unlocking early.

19. Withdraw

    Scroll to the bottom of the page and make sure you are on the Deposit tab, and click “Withdraw”. Select the type of balance to withdraw (i.e. Uncollateralized Balance or Collateralized Balance) and enter the amount you wish to withdraw. Click “Continue” and “Withdraw”.

20. Complete Arbitrum Sepolia tasks

    The Arbitrum Sepolia tasks are completed on the Arbitrum Sepolia testnet network. A guide on how to complete these tasks are set out in steps 21 to 28 below.

21. Get testnet tokens

    Click on “Faucet” at the top of the page and “Click all”. Note you will need to get testnet ETH separately from another faucet. Come back every 24 hours to make a new faucet request.

22. Deposit Asset(s)

    On the dashboard, make sure you are on the Deposit tab, scroll to the bottom of the page and click “Deposit”. Select the type of deposit you wish to make and enter the amount you wish to deposit. Approve the transaction.

23. Borrow Asset(s)

    Go to the Borrow tab and click “Borrow”. Select the amount you wish to borrow and click “Borrow”. Approve the transaction.

24. Repay Asset(s)

    Note you will need to wait around 20 minutes after borrowing assets i.e. task 23 above before you can repay. On the dashboard, make sure you are on the Borrow tab and scroll to the bottom of the page. Click “Repay”, enter the amount you wish to repay and click “Approve”. Confirm the transaction.

25. Lend Asset(s)

    On the dashboard, click “Lend” and enter the amount you wish to lend. Approve and confirm the transaction.

26. Lock CVE

    Click on the notification button on the top right-hand corner and click on “Lock CVE”. Enter the amount you wish to lock and click “Approve”. Follow the steps to approve the transaction and lock the token.

27. Unlock CVE

    Click “Manage” and “Unlock”. Note however there will be a penalty for unlocking early.

28. Withdraw

    Scroll to the bottom of the page and make sure you are on the Deposit tab and click “Withdraw”. Select the type of balance to withdraw (i.e. Uncollateralized Balance or Collateralized Balance) and enter the amount you wish to withdraw. Click “Continue” and “Withdraw”.